Handheld LiDAR Device Maintenance
※ Do not disassemble or modify the handheld LiDAR device without authorization.
The Tersus MVP S1 is calibrated and tested before leaving the factory. Any damage caused by unauthorized disassembly or modification shall be borne by the user. If you need to design or modify a mounting solution for the device, please contact Tersus GNSS Technical Support.
Battery
To charge the device, use the Tersus MVP S1 supplied charger. Insert the charger into the TYPE-C charging port on the handle. The power indicator on the handle will light up, indicating that the battery is connected to the charger. You can also press the battery button to check the remaining battery level. During charging, the number of indicator lights shows the charging progress.
Precautions
-
[Store the device in a dry, ventilated environment at room temperature to prevent lens fogging. Recommended storage temperature: -20℃ to 60℃. If fogging occurs, it usually disappears automatically after the device warms up.]
-
[Avoid storing the device in locations with strong vibrations or near strong magnetic fields.]
-
[Do not move the device directly from a cold environment to a warm one to prevent condensation.]
-
[Do not expose the device to direct sunlight for prolonged periods.]
-
[Do not scratch the lens coating with fingers or hard objects.]
-
[Keep all device ports clean and dry.]
-
[When cleaning the lens, use a soft, dry cloth. Do not use organic solvents such as thinner or gasoline.]
-
[Do not use unstable power sources or voltage exceeding the device's specifications.]
-
[Avoid frequent power on/off cycles. Wait at least 60 seconds between consecutive startups to prevent shortening the lifespan of internal components.]
-
[The handheld LiDAR is a precision device. During transport, place it securely in its carrying case.]
\