Device Operation

Device Startup

After completing the installation of the device as described in Section 3.2, you can begin using the system.

Power on the drone, and once the indicator light changes from flashing red to green, the device is successfully connected, and the system completes its normal startup process.

Note: The device requires time (usually about 60 seconds) for initialization after startup. Please be patient during the system initialization period.

Device Connection

The MVP400 system provides an integrated connection method for UAV and equipment control. Using the dedicated UAV control platform, open the MVP Pilot control software, enter the desired project or create a new flight project. On the control interface, wait approximately 30 seconds. Once the connection is successful, the status bar in the upper left corner of the software interface will display a confirmation message.

Device Shutdown

After the system stops data collection and transmission, use the software client to click the "Shutdown" button to turn off the device. Once the status indicator light on the MVP400 host turns off, power off the drone to complete the shutdown process.

Warning:

Do not disconnect the power while the host is not fully shut down to avoid potential equipment damage.

Do not insert or remove devices or USB drives while the system is powered on to prevent damage to the equipment.