Skip to main content

Tersus GNSS Center User Manual

This section contains the user manual for the Tersus GNSS Center.

In This Manual​

SectionDescription
IntroductionTersus GNSS Center manual section
FunctionsTersus GNSS Center manual section
General operationsTersus GNSS Center manual section
TerminologyTersus GNSS Center manual section

Document Information​

Revision History​

Version Revision Date Change Summary

1.0 20200909 Initial release

1.1 20211109 Upgrade section 2.3.3&3.4

2.0 20241225 Release for Tersus Tool Suite 2 new version

2.1 20250421 Upgrade section 2.2.10

Table of Content​

[Revision History 1](\l)

[Table of Content 2](\l)

[List of Figures 4](\l)

[List of Tables 6](\l)

[1. Introduction 7](\l)

[1.1 Overview 7](\l)

[1.2 Features 8](\l)

[1.3 System Requirements 9](\l)

[2. Functions 10](\l)

[2.1 Config window 10](\l)

[2.1.1 Connection 10](\l)

[2.1.2 Working mode 13](\l)

[2.1.3 Save option 19](\l)

[2.2 Interface and functions 20](\l)

[2.2.1 Menu bar 21](\l)

[2.2.2 Tool bar 22](\l)

[2.2.3 Skyplot view 24](\l)

[2.2.4 Signal strength view 25](\l)

[2.2.5 Console window 26](\l)

[2.2.6 Command window 27](\l)

[2.2.7 Board Info 27](\l)

[2.2.8 Trajectory view 28](\l)

[2.2.9 RF spectrum view 29](\l)

[2.2.10 Status bar 30](\l)

[2.2.11 Other views 31](\l)

[2.3 Tools 32](\l)

[2.3.1 Tersus Rinex Converter 32](\l)

[2.3.2 Tersus Update 33](\l)

[2.3.3 Tersus Download 34](\l)

[2.3.4 Tersus GeoPix 35](\l)

[3. General operations 36](\l)

[3.1 Connect to a BX RTK board 36](\l)

[3.2 Configure RTK board with commands 38](\l)

[3.2.1 Configure the board into base station mode 38](\l)

[3.2.2 Configure the board into rover mode 39](\l)

[3.3 Data logging 40](\l)

[3.4 Convert Raw Data into Rinex 42](\l)

[4. Terminology 44](\l)

List of Figures​

[Figure 1.1 Tersus GNSS Center main interface 7](\l)

[Figure 2.1 Connection config -- serial connection 11](\l)

[Figure 2.2 Device manager 11](\l)

[Figure 2.3 Connection config -- demo file 12](\l)

[Figure 2.4 Base mode configuration 13](\l)

[Figure 2.5 Options for RTCM2 14](\l)

[Figure 2.6 Options for RTCM3 14](\l)

[Figure 2.7 Options for CMR 15](\l)

[Figure 2.8 Output options 15](\l)

[Figure 2.9 Configure COM1 for rover mode 16](\l)

[Figure 2.10 Configure COM2 for rover mode 17](\l)

[Figure 2.11 Configure USB for rover mode 17](\l)

[Figure 2.12 Configure FILE for rover mode 18](\l)

[Figure 2.13 Save option config 19](\l)

[Figure 2.14 Tersus GNSS Center main interface 20](\l)

[Figure 2.15 Ntrip Setting 22](\l)

[Figure 2.16 Set environment preferences 23](\l)

[Figure 2.17 Tersus Center Version 23](\l)

[Figure 2.18 Skyplot view 24](\l)

[Figure 2.19 Signal strength view 25](\l)

[Figure 2.20 Text console window 26](\l)

[Figure 2.21 Track info window 26](\l)

[Figure 2.22 Log window 26](\l)

[Figure 2.23 Command window 27](\l)

[Figure 2.24 Board Information 27](\l)

[Figure 2.25 Map View 27](\l)

[Figure 2.26 Trajectory view 28](\l)

[Figure 2.27 RF spectrum view 29](\l)

[Figure 2.28 Indicators 30](\l)

[Figure 2.29 Connection status 30](\l)

[Figure 2.30 Altitude info 31](\l)

[Figure 2.31 UTC time 31](\l)

[Figure 2.32 Velocity info 31](\l)

[Figure 2.33 Heading info 31](\l)

[Figure 2.34 Tersus Rinex Converter 32](\l)

[Figure 2.35 Update firmware 33](\l)

[Figure 2.36 Tersus download 34](\l)

[Figure 2.37 GeoPix main interface 35](\l)

[Figure 3.1 Connection configuration 37](\l)

[Figure 3.2 Command prompt and text console 38](\l)

[Figure 3.3 Save Received Data option 40](\l)

[Figure 3.4 Choosing saved data location 41](\l)

[Figure 3.5 Converting data 43](\l)

List of Tables​

[Table 1 System Requirements for Tersus GNSS Center 9](\l)

[Table 2 Indicators description 30](\l)

[Table 3 Common used RTCM messages 39](\l)

Support: support@tersus-gnss.com